psc logo

logo mobile

 


Mountain View

The BF18 series of inline mist-eliminating stainless steel housings is designed to hold one 24" x 24" x 2” stainless steel demister element (AK5216), sold separately. Unit has a bottom-mounted valve with ¼” NPT fitting to drain off collected moisture. Can accommodate up to 2500 CFM flow. Unit will optionally hold any framed 24" x 24" x 2” filter element such as the AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, or AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 27" L x 25" W x 27-1/2" H. Custom sizes and configurations are available.

Shown above is P/N BF18S8


Inline Stainless Steel Pre-filter Housings

Mountain View

Units are comprised of stainless steel inlet and outlet plenums. Please see element options below. Custom sizes and configurations are available.

 
 

Shown above is P/N C108697


Inline Stainless Steel HEPA Filter Housings

Mountain View

Units are comprised of stainless steel inlet and outlet plenums, capturing one 24" x 24" x 12" HEPA filter (sold separately, see element options below). RPS recommends the AK47 or AK08 HEPA filters for all of our inline stainless steel HEPA filter housings. Nominal dimensions are 34" L x 27" W x 27" H. Custom sizes and configurations are available.

Shown above is P/N BF21D8


Inline Carbon Steel Pre-filter Housings

Mountain View

Inline, powder coated, carbon steel pre-filter housings accept up to four 24" x 24" x 2" pre-filter elements in any combination. RPS recommends the following pre-filters: AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, and AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 28" L x 26-1/2" W x 22-1/2" H. Custom sizes and configurations are available.

Shown above is P/N BF20D8